AlwayCare DMS solutions monitor driver state and provide configurable alerts for fatigue-related signs and risky driving behaviors. Actual functions depend on the selected model and configuration.
Engineered to adapt to diverse fleet modernization budgets: standalone all-in-one retrofits, plug-and-play sensor integration for existing telematics, and centralized enterprise multi-channel MDVR ecosystems.
MR830 is an all-in-one DMS platform with optional ADAS and BSD, 4G/GPS/Wi-Fi connectivity, up to 512GB TF-card storage, remote video monitoring, and fleet-management support. Confirm the final configuration before quoting.
MR810 is a standalone DMS device for fleets that already use an AVL, GPS tracker, or MDVR. It provides driver-behavior alerts and can integrate with compatible systems through I/O or RS232; confirm interface and configuration requirements for the project.
MR920 is a 9-channel mobile DVR using eight AHD channels and one IP camera channel. Depending on the selected configuration, it can connect DMS, ADAS, and BSD functions with GPS/BeiDou and 4G or Wi-Fi connectivity.
Typical solution architecture from driver-state sensing to local alerts, optional recording, and compatible fleet systems. The exact BOM depends on vehicle type, selected products, and project requirements.
| No. | System Subsystem | Recommended Model | Key Technical Specifications | Operational Role |
|---|---|---|---|---|
| 01 | Driver Status AI Camera | MR830 / MR810 / MR910-D | DMS camera and driver-state monitoring functions vary by model | Fatigue and behavior alerts according to the selected configuration |
| 02 | AI Edge Telematics Host | MR920 / MR910-D | Multi-channel recording with optional AI, GPS/BeiDou, and 4G or Wi-Fi according to model | Connected monitoring and incident review when configured with the required cameras and platform |
| 03 | Forward ADAS Sensor | AWS302 Forward Camera | 1080P Sony sensor, 60fps dynamic processing, calibration target included | Forward collision warning (FCW), lane departure (LDW), headway monitoring |
| 04 | Active Blind Spot Camera | CC1004-BSD (Dual Units) | Use a compatible BSD camera and warning device when the project requires side-zone detection | Right-side and left-side blind zone pedestrian/cyclist/vehicle detection |
| 05 | Driver HMI Safety Display | DP230 IPS Monitor | Use a compatible in-cab monitor when visual display is required | Visual assistance during maneuvering and real-time hazard warnings |
| 06 | Audio-Visual Cabin Alert | PZ-Alert Piezo Buzzer | Local voice or visual alerts according to selected hardware | Immediate wake-up alert to overcome severe drowsiness |
| 07 | Automotive Wire Harness | Armored Aviation Harness | Aviation GX16 sealed connectors, oil-resistant PU spring cable, anti-wear sleeve | Vehicle power and cable selection must be confirmed for the installation |
Intelligent AI vision and sensor telematics engineered for diverse vehicle types and high-hazard commercial fleets.
Transit FleetsAI passenger counting (APC >98.5%), driver fatigue alerts, and articulated bus 360° surround view systems.
Commercial FreightAI MDVR telematics, dual-side blind spot pedestrian detection, 360° AVM, and anti-theft fuel level telemetry.
Heavy IndustryUltra-rugged 77GHz millimeter-wave radar and thermal imaging safety systems engineered for extreme mining dust.
Hazmat & OilATEX/ADR explosion-proof surveillance, cabin fatigue monitoring, and blind spot alarms for hazardous transport.
Field-proven infrared sensor cameras, edge AI computing hosts, and automotive-certified displays engineered for demanding commercial transportation environments.
All-in-one DMS with optional ADAS and BSD, 4G/GPS/Wi-Fi connectivity, up to 512GB TF-card storage, remote video monitoring, and fleet-management support according to configuration.
View Product DetailsAutomotive edge AI camera with RS232/RS485/CAN interfaces, 4-pin aviation video feed, and multi-protocol telematics integration for existing fleet boxes.
View Product Details
9-channel mobile DVR using eight AHD channels and one IP channel, with optional DMS, ADAS, BSD, GPS/BeiDou, and 4G or Wi-Fi connectivity according to configuration.
View Product Details
7-inch 480p vehicle monitor with two AV inputs, automatic reversing display, and support for compatible AHD and CVBS camera signals.
View Product DetailsUse cases below describe representative fleet applications. Request project references and performance data relevant to your operating environment.
MR830 can be configured for coach fleets that need standalone driver monitoring, local alerts, and optional connectivity. Confirm fleet size, operating routes, and selected functions during project scoping.
MR920 can support multi-channel recording with optional DMS, ADAS, and BSD functions for connected heavy-vehicle operations. The final camera, network, and platform configuration should be validated before deployment.
MR810 can be evaluated for fleets that want DMS alerts integrated with an existing AVL, GPS tracker, or MDVR through compatible interfaces. Hazardous-transport compliance remains subject to the operator's local requirements.
In-depth technical answers for fleet safety executives, telematics engineers, and commercial vehicle operations directors.
We're ready when you are. Let's talk about configuring the right anti-fatigue safety system for your commercial fleet.
